So once I've pushed the bulb all the way into the socket, I'm ready to push it back into position and gently turn it about a quarter turn to lock it back into place. So when you're replacing these bulbs, you want to be careful not to touch the actual bulb with your fingers because the oily residue can heat up over time and cause early failure the bulb, so I'm using this paper towel to carefully handle the bulb.
And these just pull straight out and then the new ones push straight in. And I'm going to just grab the housing and twist it counterclockwise and you can hear it snap out it comes right there. It's the parking light bulb which I'm going to replace, I'm going to show you, I'm gonna reach in there. So here we're looking at both the high beam and way up in the corner up here. And then up here we have the turn signal bulb, which is also easily accessible from inside of the hood. And there's several videos that cover that in depth. This one's actually fairly difficult to replace it requires getting in from the fender well. So moving over here we have the regular low beam bulb. Both of those are easily accessed from behind here with the hood open. And in the corner of that same area is the parking light. So from the center out, you have a high beam bulb, which is right in here. "Looking at my 2012 Subaru Outback, and going to look at the individual bulbs that are in the headlight assembly.
0 kommentar(er)
